News

Beef Bones for Bone Broth: What They Are, How to Use Them, and What to Expect

Published

2 months ago

June 10, 2026

Introduction

If you’ve ever simmered a pot of beef bones for hours and ended up with a rich, golden liquid that gels when cold, you’ve made bone broth. It’s one of the oldest preparations in cooking, yet it’s also one of the most misunderstood. People search for information on beef bones and bone broth for all kinds of reasons — some want to improve their health, others are curious about the cooking process, and many are simply confused about what bone broth actually is and whether it lives up to the claims made about it.

Table of Contents

This article breaks it all down clearly, from which bones work best to what the science actually says about nutrition.

What Is Beef Bone Broth?

Beef bone broth is a liquid made by simmering beef bones and often connective tissue, marrow, and cartilage — in water for an extended period, typically six to twenty-four hours. The long cook time draws out collagen, minerals, gelatin, and marrow fat from the bones into the liquid. The result is a deeply flavored, nutrient-dense stock that solidifies into a jelly-like consistency when chilled. It differs from regular beef stock primarily in cook time and bone density.

Which Beef Bones Work Best for Bone Broth

Not all bones produce the same results. The type of bone you use directly affects the flavor, gelatin content, and nutritional profile of your broth.

Knuckle bones are among the most popular choices. They come from the joint area and are packed with cartilage, which breaks down into gelatin during cooking. Broth made with knuckle bones tends to have a thick, jiggly consistency when cold — a sign of high gelatin content.

Marrow bones are the large, cylindrical bones from the leg. They contain a rich, fatty marrow that gives broth a deep, savory flavor and a silky mouthfeel. Roasting them before simmering intensifies the flavor significantly.

Oxtail is technically a cut rather than a standalone bone, but it’s one of the best options for broth. It contains a good mix of bone, cartilage, meat, and fat, producing a full-bodied and flavorful result.

Neck bones are underrated. They’re affordable, widely available, and contain enough cartilage and meat to produce a well-rounded broth. They’re a smart budget choice.

Foot bones and joints, when available, add a tremendous amount of gelatin to the broth. They’re not always easy to find in standard grocery stores, but butchers often carry them.

For the best broth, most experienced cooks recommend using a combination — typically knuckle or joint bones for gelatin, marrow bones for flavor, and a small amount of meaty bones for depth.

How to Make Beef Bone Broth: Step by Step

Step 1: Source your bones

Ask a butcher for soup bones or marrow bones. Many grocery stores also carry bags of mixed beef bones in the freezer section. Grass-fed bones are often preferred for flavor and fat quality, though the difference in the final broth is subtle.

Step 2: Roast the bones

Spread the bones on a baking sheet and roast at 200–220°C (400–425°F) for 30–45 minutes until browned. This step is optional but makes a noticeable difference in flavor. The browning reaction (Maillard reaction) creates deeper, more complex savory notes.

Step 3: Blanch if desired

Some cooks briefly boil the bones in water, then discard that water before the long simmer. This removes impurities and blood, resulting in a cleaner-tasting, clearer broth. It’s especially useful for bones from younger animals or if you want a lighter-colored result.

Step 4: Add bones to a large pot

Place the roasted bones in a stockpot or slow cooker. Cover with cold water — about 3–4 litres for a standard batch. Add a splash of apple cider vinegar (roughly one to two tablespoons). The vinegar is mildly acidic and is thought to help draw minerals from the bones into the water, though the practical effect on mineral content is modest.

Step 5: Add aromatics

Add onion, celery, carrot, garlic, and herbs such as bay leaves, thyme, or parsley if you want a more complex flavor. These are optional — plain bone broth without aromatics has its own clean, meaty taste.

Step 6: Simmer low and slow

Bring to a boil, skim any foam from the surface, then reduce to the lowest simmer. The broth should barely bubble. Simmer for a minimum of six hours; twelve to twenty-four hours is common. A slow cooker on low makes this process easy to manage overnight.

Step 7: Strain and cool

Pour the broth through a fine mesh strainer. Discard the solids — the bones have given up most of what they have to offer. Let the broth cool, then refrigerate. The fat will solidify on top and can be removed or stirred back in, depending on your preference.

Step 8: Check the gel

A good bone broth will partially or fully solidify in the fridge due to the gelatin content. If yours doesn’t gel, it either needs more collagen-rich bones or a longer cook time. It’s still nutritious and useful — just lower in gelatin.

What’s Actually in Beef Bone Broth?

Bone broth contains several compounds worth understanding separately.

Gelatin is the cooked form of collagen. When bones and connective tissue are simmered for a long time, collagen breaks down into gelatin. Gelatin is a protein that supports joint health, digestion, and skin elasticity — though the extent to which dietary gelatin translates into clinical benefits is still being studied.

Collagen itself is technically not present in finished broth — it has converted to gelatin through heat. Supplements sold as “collagen” are usually hydrolyzed collagen (collagen peptides), which are processed differently and are easier for the body to absorb.

Minerals including calcium, magnesium, phosphorus, and potassium leach into the broth from the bones. The amounts vary depending on bone type, cook time, and acidity of the liquid. While bone broth does contain these minerals, it is generally not a primary dietary source — the quantities per serving are relatively modest compared to whole foods.

Glycine and proline are amino acids found in gelatin that are important for skin, connective tissue repair, and liver detoxification. They’re present in notable quantities in a well-made bone broth.

Glutamine is another amino acid found in bone broth that may support gut lining integrity, which has made bone broth popular among people following gut-healing diets such as the GAPS protocol.

The Nutritional Claims: What’s Supported and What Isn’t

Bone broth has attracted considerable health marketing, and it’s worth separating what the evidence actually shows from what’s extrapolated or overstated.

What’s reasonably supported:

Bone broth is a good source of gelatin, glycine, and proline. These compounds play genuine roles in the body’s connective tissue, skin, and gut health. Regular consumption of protein-rich, mineral-containing foods — including bone broth — can contribute to a balanced diet.

What’s less clear:

Whether consuming gelatin orally translates into improved joint cartilage, glowing skin, or healed gut lining is not definitively established in clinical research. The body digests gelatin like any other protein — breaking it into amino acids — rather than sending it directly to your joints or skin. Some studies show modest benefits for joint comfort and skin hydration from collagen supplementation, but much of this research uses concentrated collagen peptide supplements, not whole bone broth.

What’s overstated:

Claims that bone broth “seals and heals” the gut, eliminates inflammation, or detoxifies the liver are not supported by clinical evidence. These are often marketing-driven descriptions of biological functions that gelatin and glycine are involved in, extrapolated beyond what the research actually demonstrates.

Bone broth is genuinely nutritious and has a place in a healthy diet. But it’s food — not medicine.

Common Mistakes When Making Beef Bone Broth

Boiling instead of simmering.

A hard boil creates a cloudy, sometimes bitter broth and can make fats emulsify into the liquid in an unpleasant way. A gentle simmer is always better.

Not roasting the bones first.

Raw bones produce a much lighter, sometimes bland broth. Roasting for 30–45 minutes adds significant depth. Skipping this step is the most common reason a first batch disappoints.

Using only marrow bones.

Marrow bones add wonderful flavor and fat but relatively little gelatin. Without knuckle, joint, or foot bones, the broth won’t gel.

Adding too much water.

Covering the bones by more than a few centimeters dilutes the broth. Use just enough water to cover the bones.

Expecting it to taste like soup stock.

Unseasoned bone broth has a mild, savory flavor. It’s not the same as a finished soup — it’s a base or a drink. Many people add salt, herbs, or a squeeze of lemon before consuming.

Discarding the fat too quickly.

The fat that solidifies on top after refrigeration seals the broth and extends its shelf life. Remove it before reheating or leave it in for added richness, but don’t assume you must discard it immediately.

How to Store and Use Beef Bone Broth

Bone broth keeps in the refrigerator for four to five days. For longer storage, freeze it in portions — silicone ice cube trays work well for small amounts, while mason jars or freezer bags handle larger batches. Leave space at the top of containers for expansion.

Common uses include:

Sipping it warm as a drink, often with salt and a small amount of butter or oil
Using it as a base for soups, stews, and sauces
Adding it to rice or grains instead of water for added flavor
Using it to deglaze a pan when cooking meat or vegetables
Mixing it into smoothies (less common, but done with neutral or lightly flavored batches)

Key Facts

Beef bone broth made with knuckle and joint bones will gel when refrigerated — this is a good quality indicator
The typical cook time ranges from six to twenty-four hours; longer simmering extracts more gelatin
Roasting bones before simmering is optional but strongly improves flavor
A splash of apple cider vinegar during cooking may slightly increase mineral extraction
Bone broth is not a complete protein source — it lacks several essential amino acids in adequate quantities
Grass-fed bones are often preferred but produce only subtly different results in the final broth
Store-bought bone broth varies widely in quality — check if it gels when refrigerated as a simple quality test

FAQs

Q1: What is the difference between bone broth and regular beef stock?

Ans: Regular beef stock is typically simmered for two to four hours and focuses on flavor. Bone broth is simmered much longer — often twelve to twenty-four hours — to extract more gelatin, collagen, and minerals from the bones. Bone broth also tends to have a denser, more gelatinous texture when cold.

Q2: Which bones produce the most gelatin?

Ans: Knuckle bones, joint bones, and feet contain the most cartilage and connective tissue, which breaks down into gelatin. Marrow bones contribute flavor but relatively less gelatin.

Q3: Does bone broth actually heal the gut?

Ans: The evidence is limited. Gelatin and glutamine, both found in bone broth, are involved in maintaining the gut lining. However, no clinical trials firmly establish that drinking bone broth heals leaky gut or resolves digestive disorders. It may support gut health as part of a broader diet, but it is not a medical treatment.

Q4: Is bone broth safe to consume daily?

For most people, yes. It’s a nutritious food with a low risk profile. People with histamine intolerance should be cautious, as long-simmered broths are high in histamines. Anyone with kidney disease should consult a doctor before adding high-protein foods to their regular diet.

Q5: Why didn’t my broth gel?

Ans: The most common reasons are using bones with low cartilage content (such as only marrow bones), not simmering long enough, or using too much water. Adding more knuckle or joint bones and extending the cook time usually solves the problem.

Q6: Can I reuse bones for a second batch?

Ans: Yes, though the second batch will be lighter in flavor and gelatin. Many cooks freeze used bones and make a second, milder broth from them. The first batch will always be the strongest.

Q7: How do I know if store-bought bone broth is good quality?

Ans: Put a small amount in the fridge. A quality bone broth should thicken or fully gel when cold. If it stays liquid, it was either diluted or made with insufficient collagen-rich bones.

Key Takeaways

Beef bone broth is made by simmering bones — ideally a mix of marrow, knuckle, and joint bones — for six to twenty-four hours
Roasting bones before simmering greatly improves the flavor of the finished broth
Gelatin is the primary distinguishing nutrient; a broth that gels when cold has been made well
Bone broth contains gelatin, glycine, proline, and modest amounts of minerals — it’s a nutritious food, not a cure-all
Health claims around bone broth range from plausible to overstated; it supports a healthy diet but is not a replacement for medical treatment
Store properly: four to five days in the fridge, or freeze in portions for up to three months

Conclusion

Beef bones are the foundation of one of the most practical, flavorful, and nutritious preparations in cooking. When made well — with the right bone selection, a proper roast, and a patient simmer — the result is a rich, gelatinous broth that has genuine nutritional value and dozens of culinary uses. The health benefits are real but more modest than some popular accounts suggest. Approach bone broth as a nourishing, versatile kitchen staple rather than a wellness miracle, and you’ll get a great deal of value from it.

Up Next

What Is the Oldest City in the US? St. Augustine’s 460-Year Story

Don't Miss

Judge Orders 12000 Refugees Into the US: What Happened and Why It Matters

Click to comment

News

Jacob Elordi Girlfriend: A Look at His Dating History and Current Status

Published

1 day ago

August 13, 2026

Bryce Cotton

Jacob Elordi has spent the last several years as one of Hollywood’s most talked-about leading men, and that kind of attention comes with constant curiosity about his personal life. Between his breakout role in Euphoria and more recent films like Frankenstein and Wuthering Heights, fans keep asking the same question: who is Jacob Elordi’s girlfriend right now? The honest answer is a bit complicated, since Elordi keeps his relationships mostly private and rarely confirms anything himself.

Quick Answer: Is Jacob Elordi Dating Anyone?

As of early 2026, Jacob Elordi’s relationship status is unconfirmed. He has an on-again, off-again history with influencer Olivia Jade Giannulli that dates back to 2021, with the most recent reconciliation reports surfacing in January 2026. He has also been linked to model Kendall Jenner following sightings at Coachella. Neither relationship has been publicly confirmed by Elordi himself.

Why Jacob Elordi’s Love Life Gets So Much Attention

Elordi built his early fame playing romantic leads, first in The Kissing Booth films and then in Euphoria, where his on-screen chemistry with co-star Zendaya spilled into real-life dating rumors. That pattern has followed him through his career: several of his real relationships have started with co-stars or overlapped with high-profile press tours. Combine that with a famously private personality, and you get a recipe for constant speculation every time he’s photographed with someone new.

Olivia Jade Giannulli: The On-Again, Off-Again Relationship

The relationship most associated with Jacob Elordi is with Olivia Jade Giannulli, a lifestyle influencer and the daughter of actress Lori Loughlin and designer Mossimo Giannulli. Their romance rumors first started in December 2021, shortly after Elordi’s split from model Kaia Gerber.

How the Relationship Developed

The two were first spotted getting coffee together in Los Angeles in late 2021, though early reports on whether they were officially dating conflicted with one another. Over the next several years, their relationship followed a pattern of breakups and reunions:

2022: The pair reportedly split in August, citing a lack of seriousness on either side.
2023: They reconciled and were seen traveling together, including a trip to Idaho to visit Giannulli’s parents.
2024: Breakup rumors surfaced again, but the couple was later seen vacationing together in Sardinia, Italy.
August 2025: People reported the couple had split for good, citing long-distance challenges.
September 2025: They reconciled once more, and Giannulli attended the Toronto International Film Festival premiere of Elordi’s film Frankenstein.
October 2025: Sources described the relationship as “fully over,” with one insider telling People they were “not getting back together.”
January 2026: The two were spotted together again in New York City, including a dinner with Elordi’s parents, sparking fresh reconciliation rumors.

Neither Elordi nor Giannulli has publicly addressed their relationship status since that January sighting, which is fairly typical of how the couple has always handled media attention.

Kendall Jenner Rumors

In early 2026, new reports linked Elordi to model Kendall Jenner after the two were reportedly seen together during Coachella weekend. Sources described the pair as “hanging out” for a couple of months, though nothing has been officially confirmed by either party. Given Elordi’s history of unconfirmed relationships, these reports should be treated as speculation rather than established fact.

A Look Back: Jacob Elordi’s Previous Relationships

Elordi’s dating history includes several relationships that made headlines well before Olivia Jade.

Zendaya

Elordi and his Euphoria co-star Zendaya were linked starting in August 2019, after they were seen vacationing together in Greece. The two were later photographed being affectionate in New York City, and Elordi even joined Zendaya’s family in Sydney, Australia. Their relationship was never formally confirmed by either actor, which set the tone for how Elordi would handle future dating rumors.

Kaia Gerber

Elordi dated model Kaia Gerber from around September 2020 until November 2021. Their relationship overlapped with the tail end of the pandemic era, when public appearances were less frequent, so much of what’s known comes from limited sightings rather than confirmed statements.

Joey King

Elordi’s relationship with The Kissing Booth co-star Joey King is one of his earliest publicly discussed romances. The two met on set when King was around 18 and Elordi around 20, and their relationship was confirmed at the time, unlike most of his later romances.

Common Misconceptions

Misconception: Every rumored relationship is confirmed. Most outlets covering Elordi’s love life rely on “sources” or “insiders,” which is standard for celebrity reporting but does not amount to confirmation from Elordi or the person he’s rumored to be dating.

Misconception: Elordi is active on social media, so his relationships would show up there. Elordi has said directly that he has no relationship with social media, which is part of why so much of his dating life is pieced together from paparazzi photos and unnamed sources rather than posts or public statements.

Key Facts

Jacob Elordi is an Australian actor known for Euphoria, Saltburn, Priscilla, Frankenstein, and Wuthering Heights.
His most documented relationship is with influencer Olivia Jade Giannulli, on and off since December 2021.
Recent reports from early 2026 link him to model Kendall Jenner, though this remains unconfirmed.
Past relationships include Zendaya, Kaia Gerber, and Joey King.
Elordi has publicly stated he avoids social media and keeps his personal life private.

Worth Noting

Celebrity relationship reporting often relies on secondhand sourcing, and Jacob Elordi’s situation is a clear example of that. Multiple outlets have reported conflicting updates on the same relationship within the same month, which says less about the accuracy of any single report and more about how little Elordi and his rumored partners actually confirm. Readers looking for a definitive answer on his current girlfriend should treat any specific name as a developing story rather than settled fact.

Frequently Asked Questions

Q1: Who is Jacob Elordi’s girlfriend?

Ans: There is no publicly confirmed girlfriend as of the most recent reports. He has an on-and-off history with Olivia Jade Giannulli and has recently been linked to Kendall Jenner, but neither relationship has been confirmed.

Q2: Is Jacob Elordi still with Olivia Jade?

Ans: Reports from January 2026 suggest the two may have reconciled after an October 2025 breakup, but neither has confirmed their current status.

Q3: Did Jacob Elordi date Zendaya?

Ans: Yes, the two were linked from 2019 into 2020, though neither publicly confirmed the relationship.

Q4: Is Jacob Elordi dating Kendall Jenner?

Ans: The two have been linked in rumors since early 2026, but this has not been officially confirmed by either party.

Q5: Why doesn’t Jacob Elordi talk about his relationships publicly?

Ans: He has said in interviews that he prefers to keep his personal life separate from his acting career and avoids social media entirely.

Key Takeaways

Jacob Elordi’s relationship status is currently unconfirmed.
His longest-documented relationship is with Olivia Jade Giannulli, marked by repeated breakups and reunions since 2021.
Recent rumors connect him to Kendall Jenner, though nothing is confirmed.
His past relationships include Zendaya, Kaia Gerber, and Joey King.
Elordi avoids social media and rarely discusses his personal life publicly.

Conclusion

Jacob Elordi’s dating life has generated years of headlines, but very little of it comes from Elordi himself. His on-and-off relationship with Olivia Jade Giannulli remains the most documented romance in his history, while newer rumors involving Kendall Jenner add another layer of speculation. Given his consistent preference for privacy, the clearest answer to who Jacob Elordi is dating may simply be that fans will have to wait for him to say so himself.

News

TN Election Results 2026: A Complete Guide

Published

1 day ago

August 13, 2026

Bryce Cotton

Introduction

Tennessee held its 2026 primary election on August 6, setting the stage for a high-stakes general election on November 3. Voters are searching for TN election results because this cycle includes an open governor’s race, a U.S. Senate contest, all nine U.S. House seats, and dozens of state legislative races. With Governor Bill Lee term-limited and unable to run again, this is the first competitive governor’s race in Tennessee in nearly a decade.

This guide breaks down what happened in the August primary, what’s still ahead in November, and how to find accurate, up-to-date results as they’re certified.

Direct Answer

Tennessee’s August 6, 2026 primary produced nominees for the November 3 general election. On the Republican side, U.S. Senator Marsha Blackburn won the gubernatorial primary over Congressman John Rose and Monty Fritts. Democrat Jerri Green won her party’s nomination for governor. Bill Hagerty ran unopposed for the Republican U.S. Senate nomination, and Marquita Bradshaw won the Democratic Senate primary. All results remain unofficial until county election commissions certify them.

Understanding Tennessee’s 2026 Election Cycle

Tennessee runs its major statewide races on a two-step calendar: a primary election in early August, followed by a general election in November. In 2026, that meant:

August 6, 2026 — Primary elections for governor, U.S. Senate, U.S. House, the Tennessee General Assembly, and many county offices, including judicial retention votes.
November 3, 2026 — The general election, where primary winners face off against each other and any independent candidates.

Tennessee uses open primaries. That means a voter isn’t registered with a party in advance. On primary day, they simply choose whether to pick up a Republican or Democratic ballot. This system tends to draw more participation than closed-primary states, but it also means primary turnout doesn’t always reflect a party’s true base of registered supporters, since crossover voting is legal.

Why This Election Cycle Matters

Tennessee hasn’t had an open governor’s race decided by term limits in this way since Bill Lee first won in 2018. Bill Lee is finishing his second term and, under Tennessee’s constitution, cannot seek a third consecutive term. That guarantees a new governor takes office in January 2027, regardless of which party wins.

The state has also trended solidly Republican in statewide races for years. Democrats haven’t won a statewide race in Tennessee since Phil Bredesen’s re-election as governor in 2006, and they haven’t won a U.S. Senate seat there since 1990. That history shapes expectations for November, even though nominees from both parties are campaigning hard.

August 6 Primary Results

Primary results below reflect the count as of election night and the days after. Tennessee counties have until August 24 to formally certify results, so numbers can shift slightly, though the overall winners are not expected to change.

Governor

On the Republican side, U.S. Senator Marsha Blackburn won the nomination, finishing well ahead of U.S. Representative John Rose and businessman Monty Fritts. Blackburn’s win means Tennessee could see a Senate vacancy filled by appointment if she wins in November, since the governor and outgoing Governor Lee would be responsible for naming her Senate replacement until a special election.

On the Democratic side, Memphis Democrat Jerri Green won her party’s nomination, defeating museum president Carnita Atwater and several other candidates.

Green and Blackburn will face each other on the November 3 general election ballot.

U.S. Senate

Incumbent Republican Senator Bill Hagerty, who first won his seat in 2020 with about 62% of the vote, ran unopposed in the Republican primary. On the Democratic side, Marquita Bradshaw — an environmental activist from Memphis who was also the party’s 2020 Senate nominee — won her primary over several other Democratic candidates.

Hagerty enters the general election with a substantial financial advantage and the benefit of incumbency, while Bradshaw is making a second run for the seat.

U.S. House

Tennessee has nine U.S. House seats, and primary contests played out differently district by district. Some incumbents ran unopposed, while others faced real primary challenges. Notably, one sitting Republican congressman lost his primary bid for renomination, a reminder that incumbency doesn’t guarantee a smooth path even in safely partisan districts.

State Legislature

All 33 seats in the Tennessee Senate weren’t up this cycle — only 17 of them were, matching the normal staggered schedule for that chamber. All 99 seats in the Tennessee House of Representatives were on the ballot, as they are every two years. Going into 2026, Republicans held large majorities in both chambers: 75 of 99 House seats and 27 of 33 Senate seats. Many legislative primaries were uncontested, particularly in seats that are considered safe for one party.

How Tennessee’s Election Process Works

Understanding the mechanics helps make sense of why results take time to finalize.

Polls close. On election night, polling locations close at 7 p.m. Central/8 p.m. Eastern, depending on the county’s time zone.
Unofficial results post. The Tennessee Secretary of State’s office and county election commissions begin posting unofficial vote totals as precincts report.
Absentee and provisional ballots are processed. These can take additional days to fully count, especially in close races.
County election commissions certify results. Each county has a deadline — typically a couple of weeks after election day — to make results official.
The state certifies statewide totals. Once every county has certified, the Secretary of State certifies the statewide outcome.
Any recounts or contests are resolved, if a race is close enough to trigger one under state law.

This process is why numbers reported on election night sometimes shift slightly by the time results are finalized, even though the winner is rarely in question except in genuinely close races.

Common Mistakes and Misconceptions

Mistake: Assuming election-night numbers are final. Election-night tallies are unofficial. Certification can adjust vote totals by small amounts as absentee and provisional ballots are fully processed.

Misconception: The primary winner automatically wins the general election. Tennessee leans Republican in most statewide races, but that’s a historical pattern, not a guarantee. General election turnout and dynamics can differ from the primary.

Misconception: Open primaries mean voters are registered by party. Tennessee doesn’t register voters by party at all. A voter’s primary ballot choice in one election says nothing about how they’ll vote in the next one.

Mistake: Confusing the primary and general election dates. The August primary determines each party’s nominee. The November general election determines who actually holds the office.

What Happens Next: The November 3 General Election

With nominees set, the general election campaign moves into its next phase. Key races to watch:

Governor: Marsha Blackburn (R) vs. Jerri Green (D)
U.S. Senate: Bill Hagerty (R) vs. Marquita Bradshaw (D)
U.S. House: All nine seats, with most considered safe for one party based on district lines
Tennessee General Assembly: Control of both chambers, though Republican majorities are not seriously contested statewide

Because Blackburn is running for governor while keeping her Senate seat until the end of her term, her Senate seat itself is not on this year’s ballot — only Hagerty’s seat is up in 2026. If Blackburn wins the governorship, filling her Senate seat becomes a separate process involving a gubernatorial appointment and eventually a special election.

Key Facts

Tennessee’s 2026 primary was held August 6; the general election is November 3.
Governor Bill Lee is term-limited and not on the 2026 ballot.
Marsha Blackburn won the Republican gubernatorial primary; Jerri Green won the Democratic gubernatorial primary.
Bill Hagerty ran unopposed for the Republican U.S. Senate nomination; Marquita Bradshaw won the Democratic nomination.
Tennessee uses open primaries — voters choose a party ballot on election day rather than registering by party in advance.
Democrats have not won a statewide race in Tennessee since 2006 (governor) or a U.S. Senate seat since 1990.
County election commissions had until August 24, 2026 to certify primary results.

FAQ

Q1: What are the TN election results for 2026?

Ans: The August 6 primary set the general election matchups: Marsha Blackburn (R) vs. Jerri Green (D) for governor, and Bill Hagerty (R) vs. Marquita Bradshaw (D) for U.S. Senate. The general election that decides who wins these offices is November 3, 2026.

Q2: How does Tennessee’s primary election work?

Ans: Tennessee has open primaries. Any registered voter can choose a Republican or Democratic ballot at their polling place; there’s no advance party registration.

Q3: When are Tennessee election results official?

Ans: Results are unofficial on election night. County election commissions certify results within a set window afterward — 2026 primary results were due for certification by August 24.

Q4: Where can I find official Tennessee election results?

Ans: The Tennessee Secretary of State’s website posts official results by county and by race, alongside candidate filings and election calendars.

Q5: Is voting in Tennessee’s primary the same as registering with a party?

Ans: No. Choosing a ballot on primary day doesn’t register a voter with that party or restrict which ballot they can choose in future elections.

Q6: Who is running for governor of Tennessee in 2026?

Ans: Republican Marsha Blackburn and Democrat Jerri Green are the major-party nominees following the August primary, with the general election on November 3, 2026.

Key Takeaways

Tennessee’s 2026 primary was held August 6; the general election is November 3.
Marsha Blackburn and Jerri Green will compete for governor; Bill Hagerty and Marquita Bradshaw will compete for U.S. Senate.
Primary results are unofficial until county certification, typically a couple of weeks after election day.
Tennessee’s open primary system lets voters pick a party ballot without registering by party.
Historical trends favor Republicans in statewide races, but the general election outcome isn’t decided until November 3.

Conclusion

Tennessee’s 2026 election results tell a two-part story: an August primary that set the field, and a November general election that will decide who actually holds office. The governor’s race is especially notable this year because term limits guarantee new leadership in Nashville, regardless of the outcome. As results move from unofficial to certified, and as the general election campaign unfolds, the Tennessee Secretary of State’s office remains the most reliable place to track official, up-to-date numbers.

News

Hugo Car Insurance: What It Actually Costs and How to Sign Up

Published

1 week ago

August 6, 2026

Bryce Cotton

Most people researching Hugo car insurance already know the basic pitch: flexible payments, no big down payment. What’s harder to find is a straight answer on what it actually costs, how the quote process works, and what signing up really involves from start to finish. This breaks down the practical side, pricing, quotes, sign-up, and cancellation, that matters most once you’re ready to decide.

Direct Answer: How Much Does Hugo Car Insurance Cost?

Hugo car insurance rates vary significantly by state, age, driving record, and coverage level, with liability-only estimates from third-party comparison sites ranging roughly from $121 to $215 per month, and full coverage estimates ranging from about $215 to $330 per month. Hugo doesn’t publish fixed pricing on its own site, since rates depend on individual driver factors, but it does offer free, fast online quotes, and its actual cost structure is based on small, flexible payments rather than one lump monthly premium.

Why Hugo’s Pricing Isn’t a Single Number

Unlike a flat subscription price, car insurance premiums are calculated individually for each driver, which explains why different comparison sites report noticeably different average rates for Hugo. Age, driving history, location, vehicle type, and coverage level all factor into the final quote, the same variables that affect pricing at any traditional insurer.

Several independent comparison sites have published differing average estimates for Hugo, generally landing somewhere between $121 and $215 a month for liability coverage, and between $215 and $330 a month for full coverage, depending on the driver profile used in each analysis. Because Hugo doesn’t publish standardized rate tables itself, treating any single number as a guaranteed price is a mistake, the only way to know your actual cost is to request a personal quote.

How Hugo’s Cost Compares to Traditional Insurers

For many drivers, Hugo’s liability-only rates run somewhat higher than the national average for comparable coverage. Some comparison data puts national average liability rates for a mid-career adult driver around $97 to $100 a month, while Hugo’s liability quotes tend to land higher for the same driver profile.

This tradeoff matters because Hugo isn’t necessarily competing on the lowest possible monthly rate. It’s competing on accessibility, no large upfront payment, fast digital sign-up, and short coverage terms as short as three days. For certain drivers, particularly those who don’t drive often or need coverage for a short, specific window, that flexibility can offset a higher per-month rate compared to a traditional six-month policy.

Step-by-Step: How to Get a Hugo Quote

Getting a quote from Hugo is designed to be quick, and the process generally follows these steps:

Visit Hugo’s website or open the app. Hugo is available both as a website and as a mobile app for iOS and Android.
Click “Get Started.” This begins Hugo’s quote questionnaire.
Enter personal and vehicle information. This typically includes your name, date of birth, driver’s license number, ZIP code, and vehicle identification number (VIN).
Review your personalized quote. Hugo calculates a daily rate based on the information provided, which determines your total cost for whatever coverage term you choose.
Select a plan and coverage term. Choose between available plans and a purchase term, generally three, seven, 14, or 30 days, or longer.

According to Hugo’s own support documentation, getting a quote typically takes under a minute, with full policy purchase generally completing in under five minutes for drivers who have their license and VIN on hand.

What You Need Before Signing Up

Having a few details ready in advance speeds up the process considerably:

Driver’s license number
Vehicle identification number (VIN)
Home address and ZIP code
A payment method to link to your account

Because Hugo’s sign-up process is entirely digital, there’s no need to speak with an agent by phone unless you specifically want to, which is part of what makes the process faster than some traditional insurers’ onboarding.

How Payment and Renewal Work After Sign-Up

Once a policy is active, Hugo’s ongoing payment structure follows the same flexible logic as its initial sign-up. Customers can choose to add funds manually at whatever interval works for them, every three days, weekly, biweekly, or monthly, or turn on Auto Reload for automatic payments. When a prepaid balance runs low, Hugo sends an alert prompting a reload to keep coverage continuous.

This structure means there’s no single fixed “monthly bill” the way there is with most traditional insurers. Instead, total monthly cost is really the daily rate multiplied by the number of days in that period, which is why quoted “monthly” costs from comparison sites are really an estimate based on a 30-day rate, not a fixed subscription charge.

Canceling a Hugo Policy

Canceling coverage is also handled digitally, without a required phone call, which Hugo highlights as a specific advantage over some traditional insurers that require speaking with a representative to cancel. Since coverage is prepaid in short increments, choosing not to reload your balance effectively ends coverage once the current paid period runs out.

One state-specific detail worth knowing: in South Carolina, due to state law, members who want to cancel within the first 60 days of a policy must confirm they’ve either purchased insurance elsewhere or sold or disposed of their vehicle, a requirement tied to that state’s rules around maintaining continuous coverage.

Common Mistakes and Misconceptions

Mistake: Assuming a quoted average rate reflects your personal cost. Published average rates vary widely across comparison sites, generally because they’re based on different sample driver profiles. Your actual quote depends on your specific age, location, driving record, and vehicle, which can differ significantly from any published average.

Mistake: Assuming Hugo is always the cheapest option. For many drivers, particularly those with a clean driving record and stable income who don’t mind a larger upfront payment, a traditional six-month policy from another insurer may actually cost less overall than Hugo’s flexible, higher per-day liability rate.

Mistake: Not comparing quotes before switching. Because Hugo’s flexible payment structure is the main draw for many shoppers, it’s easy to overlook comparing the actual total cost against traditional carriers. Gathering a few quotes elsewhere before committing helps confirm whether Hugo’s flexibility is worth any price difference for your specific situation.

Mistake: Assuming sign-up requires extensive paperwork. Hugo’s process is built to be fast and fully digital. Most sign-ups can be completed in under five minutes with just a license number, VIN, and payment method on hand, without mailed documents or phone calls.

Key Facts

Hugo doesn’t publish fixed pricing; rates are calculated individually based on driver and vehicle information.
Third-party comparison sites report average liability rates for Hugo generally between $121 and $215 per month, varying by source and driver profile.
Getting a quote typically takes under a minute, with full sign-up completing in under five minutes.
Sign-up requires a driver’s license number, VIN, address, and a linked payment method.
Policies can be purchased in terms as short as three days, up to six months.
Cancellation can be completed digitally without a required phone call, except for a specific attestation requirement in South Carolina within the first 60 days.

Frequently Asked Questions

Q1: How much does Hugo car insurance cost per month?

Ans: Estimates from comparison sites generally range from about $121 to $215 per month for liability coverage, and $215 to $330 for full coverage, though your actual quote depends on your specific driver profile and state.

Q2: How do I get a Hugo insurance quote?

Ans: Visit Hugo’s website or app, click “Get Started,” and enter your personal and vehicle information, including your driver’s license number and VIN, to receive a personalized quote in under a minute.

Q3: What do I need to sign up for Hugo car insurance?

Ans: You’ll need your driver’s license number, vehicle identification number (VIN), address, and a payment method to link to your account.

Q4: Can I cancel Hugo insurance anytime?

Ans: Yes, generally without needing to call anyone. One exception applies in South Carolina, where canceling within the first 60 days requires confirming you’ve secured insurance elsewhere or disposed of the vehicle.

Q5: Is Hugo car insurance cheaper than traditional insurers?

Ans: Not always. Liability-only rates from Hugo tend to run higher than some national averages, though its lack of a large upfront payment can still make it more accessible for drivers who struggle with traditional insurers’ initial costs.

Q6: How long does Hugo’s sign-up process take?

Ans: According to Hugo’s own support resources, most drivers can complete sign-up in under five minutes if they have their license and VIN ready in advance.

Key Takeaways

Hugo’s pricing isn’t fixed; it’s calculated individually, with published averages varying by comparison source and driver profile.
Liability rates tend to run higher than some national averages, while the appeal lies mainly in flexible, low-upfront payments.
Getting a quote takes under a minute, and full sign-up typically takes under five minutes with the right information on hand.
Canceling is generally simple and phone-free, aside from a specific South Carolina requirement within the first 60 days.
Comparing Hugo’s quote against traditional insurers is worth doing before committing, since flexibility and lowest cost aren’t always the same thing.

In Short

Hugo’s cost structure trades a lower upfront barrier for a pricing model that can run higher per month than some traditional insurers, particularly for liability-only coverage. Getting an accurate answer on cost means requesting a personal quote rather than relying on any single published average, since your actual rate depends on factors specific to you. The sign-up and cancellation process, by contrast, is about as straightforward as digital insurance gets: a few pieces of information, a linked payment method, and no required phone calls at either end.